Grade: 17-4PH (UNS S17400), 13-8 MO ( UNS S13800) 15-5PH (UNS S15500), SMO 254 (UNS S31254) Nitronic 50 (XM-19), Nitronic-60,A286 (UNS S66286),

Round Bars (Cold Drawn)       Application : Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles. Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished Cold Drawn, Centreless Ground & Polished (Strain Hardened) Grades 17-4PH (UNS S17400), 13-8 MO ( UNS S13800), 15-5PH (UNS S15500), SMO 254 (UNS S31254), Nitronic 50 (XM-19), Nitronic-60,A286, (UNS S66286) 304, 304L, 316, 316L Diameter (Size) 2 mm to 5mm (1/8" to 3/16") 6mm to 22m (1/4" to 7/8") 10mm to 40mm (3/8" to 1-1/2") Diameter Tolerance h9 (Din 671),h11 ASTM A 484 h9 (Din 671) ASTM A 484 h9 (Din 671),h11 ASTM A 484 Length 3/4/5.6/6 meter (12/14ft/20feet) 3/4/5.6/6 meter (12/14ft/20feet) 3/4/5.6/6 meter (12/14ft/20feet) Length Tolerance -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) -0/+200mm (-0 ”/+1 feet) We can give Chamfering of 30 or 45 degrees on one or both the ends with our dedicated chamfering machine. For Strain-Hardened Bars, we can supply in B8(304) and B8M(316) in Class1 and Class2. Round Bars (Peeled/Turned)     Condition Peeled, Centreless Ground & Polished Peeled & Polished Peeled (Rough Turned) Forged, Rough Turned Grades 17-4PH (UNS S17400), 13-8 MO ( UNS S13800), 15-5PH (UNS S15500), SMO 254 (UNS S31254), Nitronic 50 (XM-19), Nitronic-60,A286, (UNS S66286) 304, 304L, 316, 316L, 410, 416, 420, 431 303, 304, 304L, 316, 316L, 410, 416, 420, 431 Diameter (Size) 20mm to 85mm (3/4 ” to 3--1/4 ”) 85mm to 140mm (3-1/4 ” to 4--3/4 ”) 25mm to 140mm (1 ” to 5--1/2 ”) 150mm to 400mm (6 ” to 16 ”) Diameter Tolerance h9 (Din 671) ASTM A 484 h11 K12/K13 (Din 1013) -0mm/+3mm (-0 ”/+0.12 ”) Length 3/4/5.6/6 meter (12/14ft/20feet) 3/4/5.6/6 meter (12/14ft/20feet) 3/4/5.6/6 meter (12/14ft/20feet) 3 meter -5 meter 10 feet -16 feet Length Tolerance -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) -0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet) -0/+2 meter- -0/+6 feet We can give superior surface finish and straightness tolerance for Pump Shaft Quality by additional processes such as straightening,roller burnishing,and centreless grinding.Bars can be packed in wooden boxes,with each bar protected with plastic rings to avoid bending and scratches.